Specification

Technical Information
Fixture*: basin area top area
Bathing well 42″ (106.7 cm) x
23″ (58.4 cm)
51″ (129.5 cm) x
32-1/2″ (82.6 cm)
To overflow water depth capacity
11-1/4″ (28.6 cm) 56 gal (212 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding-type plug-in cord. Locate
the outlet within 24″ (61 cm) of the pump.
Pump service access is required.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Backing Block
60" (152.4 cm)
66050101, 76050101
60"
(152.4 cm)
42"
(106.7 cm)
18-1/8"
(46 cm)
16-1/2"
(41.9 cm)
43-1/2"
(110.5 cm)
29"
(73.7 cm)
13"
(33 cm)
30-1/2"
(77.5 cm)
29-1/2"
(74.9 cm)
8"
(20.3 cm)
4" (10.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
Block Locations (3)
When Optional Apron
is Used
41-3/16"
(104.6 cm)
2" (5.1 cm)
D. Drain
10"
(25.4 cm)
21"
(53.3 cm)
14"
(35.6 cm)
14"
(35.6 cm)
Drain End Pump Access
18" (45.7 cm) W
x 15" (38.1 cm) H Min
Recommended Support
Clip or Roofing Nail
Location (5 total)
Drain Cutout
1-1/2" (3.8 cm)
4-3/4" (12.1 cm)
Overflow Detail
Product Diagram
TRANQUILITY
®
TRANQUILITY
®
42″ (106.7 cm) OVAL BATH WHIRLPOOL WITH CUSTOM PUMP
Page2of2
1039448-4-
D