Installation Guide

12. Install the Optional Apron
While holding the apron from the bottom, slide it up into position under the whirlpool rim. Push
the apron back until it contacts the three blocks.
With the apron in place, drill three 1/16″ (2 mm) diameter pilot holes through the apron flanges.
Secure the apron flanges to the studs with large-head roofing nails or screws.
Ledger Strip Plan
1 Piece 2x4 - 60" (152.4 cm) Long
2 Pieces 2x4 - 39-3/4" (101 cm) Long
Blocking
16-1/2"
(41.9 cm)
Header Over
Access
Opening
Remove bottom
stud plate.
3- 2x4 Blocks
For Use With
Optional Apron
1016904-2-C 18 Sterling