Instructions / Assembly

ManualsBrandsSTERLING ManualsArtificial Christmas Trees3 ft. Pre-Lit Multicolored Fiber Optic Artificial Christmas Tree with 98 tips

ASSEMBLY and SAFETY INSTRUCTIONS

1. Before you start to assemble your tree, choose a location near a wall outlet. Place the tree stand on a level

surface.

2. Carefully insert the bottom section C of the tree pole into the stand. Make sure the pole is firmly inserted into

the stand and the screws are tightened. Then insert middle section B into bottom section C. Insert top section

A into middle section B.

3. Allow branches to fall into place or gently pull up and out. When adjusting the branches be sure that all wires

are free of branch hinges.

4. Shape the branches. Start with tips farthest from the pole, one to the right, one to the left and one at the center

of the main stem.

5. After shaping the whole tree following the previous steps, step back and take an overall look at the tree. Shift

branches to fill any gaps. Slightly upsweep all branch tips for uniform look. Your tree is now ready to decorate

and enjoy.

6. Now locate the long extension cord and plug it into the wall outlet. Then plug in extension cord for middle

section B into the extension cord on bottom section C. Lastly, plug in the light set from the top section A into

middle section B, as shown in diagram at the top of the page. Now your tree should be completed with all lights

illuminated.

Summary of content (4 pages)

PAGE 1
ASSEMBLY and SAFETY INSTRUCTIONS 1. Before you start to assemble your tree, choose a location near a wall outlet. Place the tree stand on a level surface. 2. Carefully insert the bottom section C of the tree pole into the stand. Make sure the pole is firmly inserted into the stand and the screws are tightened. Then insert middle section B into bottom section C. Insert top section A into middle section B. 3. Allow branches to fall into place or gently pull up and out.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS Basic precautions should be followed. HOW TO PROTECT THE PRODUCT: (a) Read and follow all safety instructions, then save these instructions. (b) Should you discover any of the following: 1. Cut, damaged or frayed wire insulation. 2. Cracks in the lamp holder or enclosures. 3. Loose Connections or exposed wires. Return the product to the producer or contact a service agent. (c) Before using or reusing, inspect product carefully.
PAGE 3
REPLACEMENT OF THE LAMP 1. Grasp the plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord. 2. Pull lamp and plastic base straight out of the lamp holder. 3. Replace lamp with only 2.5 volt spare bulb, which has been provided to you. USER SERVICING INSTRUCTIONS FUSE REPLACEMENT 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2.
PAGE 4
STORAGE 1. Unplug product cord from the wall outlet. 2. Unplug each section of extension cord. Keep each stack of light sets connected together. 3. Gently lift off the top section A and middle section B, and remove the bottom section C from the tree stand. 4. Carefully replace the tree in its box and tape it shut. 5. Store box in a cool, dry place where the temperature does not exceed 100 º F.