Manualshelf

Installation Guide

ManualsBrandsSTERLING ManualsBathFinesse 33-1/2 in. x 65-1/2 in. Framed Pivot Shower Door in Deep Bronze with Rain Glass Texture
12345678910
6. Install the Hinge to the Door Panel
NOTE: Leave a small gap on the handle side of the door for clearance from the strike jamb. The door will
not close properly without this gap.
Align the slotted holes on the hinge with the channel in the door panel. Make sure the top edge of
the hinge assembly is flush with the top of the channel.
Secure the hinge to the door panel using four of the provided #10-16 x 3/8″ truss head screws.
Install the hinge jamb cap on the top of the hinge jamb where it aligns with edge of door.
Bottom Seal
Bottom View
Hinge Jamb Cap
Door Panel
Door Panel
Hinge Assembly
Hinge Jamb Cap
Hinge Jamb
Cap
Assemble, making sure
top edges are flush.
#10-16 x 3/8"
Truss Head Screw
Sterling 9 1034028-2-G