Installation Guide
2. Install the Adjustment Clamps
Insert four adjustment clamps into each wall jamb as shown (eight total).
Partially thread the provided #8-18 x 1/2″ panhead screws through the pre-drilled holes in the wall
jambs and into each adjustment clamp using a Phillips screwdriver. Do not tighten the screws at this
time.
Note:
Do not fully
tighten screw.
Adjustment Clamp
#8-18 x 1/2" Screw
Wall Jamb
Wall Jamb
Top View
Wall Jamb
#8-18 x 1/2" Screw
1034028-2-G 6 Sterling










