Specification

Backer Board Locations
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Drain cutout in subfloor to be 10-1/2" (267 mm)
per rough-in illustration as shown to allow the
CenterDrain location:
backside of the drain to sit below the subflow
surface.
Studs should be positioned as shown.
Backer boards and fasteners protrude beyond
the back wall 3/4" (19 mm). If installing this
product against wall board, 3/4" (19 mm) furring
strips installed over the wall board are
recommended. The stud pocket depth of 40-5/8"
(1032 mm) will need to be increased by the
combined thickness of the wall board and furring
strips.
Attach grab bars at the specified backer board
locations only.
ADA compliant when installed to the specific
requirements of these regulations.
USA/Canada: 1-800-STERLING (1-800-783-7546)
www.sterlingplumbing.com
12-18-2014 04:41
OC-S-63
63" ADA Shower with Backer Boards
62070106