Specification Sheet

73-1/4"
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Drain cutout in subfloor to be 10-1/2" (267 mm)
per rough-in illustration as shown to allow the
CenterDrain location:
backside of the drain to sit below the subflow
surface.
Studs should be positioned as shown.
Backer boards and fasteners protrude beyond
the back wall 1-1/2" (38 mm). If installing this
product against wall board, 1-1/2" (38 mm) furring
strips installed over the wall board are
recommended. The stud pocket depth of 40-5/8"
(1032 mm) will need to be increased by the
combined thickness of the wall board and furring
strips.
ADA compliant when installed to the specific
requirements of these regulations.
USA/Canada: 1-800-STERLING (1-800-783-7546)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.sterlingplumbing.com.
8-11-2015 02:28
OC-S-63
63" Shower with Grab Bars
62060103