Use and Care Guide

ManualsBrandsSTERLING ManualsBathTransfer Shower 39-3/8 in. x 39-3/8 in. x 72 in. Shower Kit in Biscuit

Features

•

Compression molded from our exclusive solid Vikrell

material

•

Folding transfer seat with stainless steel support

•

Factory installed stainless steel grab bars

•

Durable swirl-gloss ﬁnish

•

10-year consumer/3-year commercial limited warranty

•

Tongue-and-groove 4-piece modular design allows for

easy ″snap together″ installation

•

39-3/8″ (100 cm) x 40-5/8″ (103.2 cm) x 73-1/4″

(186.1 cm) unit rough-in dimensions include ﬂange

•

39-3/8″ (100 cm) x 39-3/8″ (100 cm) x 72″ (182.9 cm)

complete unit ﬁnished dimensions

•

1/2″ (1.3 cm) threshold for easy wheelchair access

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ADA

•

ICC/ANSI A117.2

•

IAPMO/UPC

•

HUD, UM Bulletin 73A

•

NAHB Research Foundation, Inc.

•

ASTM E162

•

ASTM E662

39″ (99.1 cm) ADA COMPLIANT

SHOWER RECEPTOR AND

SURROUND

62050115

ALSO 62050125

Colors/Finishes

•

0: White

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Model Complete Unit Description Colors/Finishes

62050115 39″ (99.1 cm) ADA compliant* shower receptor and wall surround,

with grab bars on the left, with transfer seat on the right

❑ 0 ❑ Other_____

62050125 39″ (99.1 cm) ADA compliant* shower receptor and wall surround,

with grab bars on the right, with transfer seat on the left

❑ 0 ❑ Other_____

*Product is shipped as ADA compliant with factory assembled grabs bars and seats. When properly installed, the complete

installation is ADA compliant. Components are also available separately but are provided only as ADA adaptable.

Page 1 of 2

1016220-4-

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

Summary of content (2 pages)

PAGE 1
Features • • • • • • • • • Compression molded from our exclusive solid Vikrell® material Folding transfer seat with stainless steel support Factory installed stainless steel grab bars Durable swirl-gloss finish 10-year consumer/3-year commercial limited warranty Tongue-and-groove 4-piece modular design allows for easy ″snap together″ installation 39-3/8″ (100 cm) x 40-5/8″ (103.2 cm) x 73-1/4″ (186.1 cm) unit rough-in dimensions include flange 39-3/8″ (100 cm) x 39-3/8″ (100 cm) x 72″ (182.
PAGE 2
Installation Notes Install this product according to the installation guide. Size the drain cutout to fit the drain assembly that will be used. End stud positioning is critical if nailing-in flanges are to be used. Studs should be positioned roughly as shown for roofing nail installation. 12" (30.5 cm) 29" (73.7 cm) 18-3/4" (47.6 cm) 22" (55.9 cm) 40-5/8" (103.2 cm) Max. 13" (33 cm) 1-1/4" (3.2 cm) 39-3/8" (100 cm) 39-3/8" (100 cm) 8" (20.3 cm) 32-3/8" (82.2 cm) 4" (10.2 cm) 10-1/2" (26.7 cm) D.