Operating Guide

Technical Information
Model door maximum width door maximum
height
62030100 44-3/4″ (113.7 cm) 67″ (170.2 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
10" (25.4 cm)
4"
(10.2 cm)
8"
(20.3 cm)
22-1/2"
(57.2 cm)
35-1/4"
(89.5 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
48" (121.9 cm) Min.
48-1/8" (122.2 cm) Max.
24"
(61 cm)
16-1/4"
(41.3 cm)
Recommended Roofing Nail
Locations (4 total)
48" (121.9 cm)
34" (86.4 cm)
62030100
24" (61 cm)
5" (12.7 cm)
17-1/4"
(43.8 cm)
18"
(45.7 cm)
1-1/4"
(3.2 cm)
2-7/8"
(7.3 cm)
1-5/8" (4.1 cm)
45"
(114.3 cm)
73-1/4"
(186.1 cm)
16-5/8"
(42.2 cm)
3-5/16" D.
(8.4 cm)
Drain Hole
16"
(40.6 cm)
Product Diagram
ADVANTAGETM
ADVANTAGETM 48″ (121.9 cm) SEATED SHOWER RECEPTOR AND SURROUND
Page2of2
1019809-4-
D