Dimensions Guide

Technical Information
Model Door maximum
width*
Door maximum
height
62030106 44-3/4″ (113.7 cm) 67″ (170.2 cm)
* NOTE: For shower door installation use the STERLING
″SP″ fixture specific door only, due to draft angle on
shower surround walls.
Installation Notes
Install this product according to the installation guide.
End stud positioning is critical if nailing-in flanges are used.
Double studding is recommended for pivot shower door
installations.
Back Wall
End Wall
16" (40.6 cm)
1"
(2.5 cm)
10"
(25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
22-1/2"
(57.2 cm)
35-1/4"
(89.5 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
24" (61 cm)
16-1/4"
(41.3 cm)
48" (121.9 cm)
34" (86.4 cm)
24" (61 cm)
5" (12.7 cm)
17-1/4"
(43.8 cm)
18"
(45.7 cm)
1-1/4" (3.2 cm)
2-7/8"
(7.3 cm)
1-5/8" (4.1 cm)
45"
(114.3 cm)
73-1/4"
(186.1 cm)
16-5/8"
(42.2 cm)
3-5/16"
(8.4 cm) D.
Drain Hole
2"
(5.1 cm)
46"
(116.8 cm)
21"
(53.3 cm)
1"
(2.5 cm)
3-1/2"
(8.9 cm)
1"
(2.5 cm)
2"
(5.1 cm)
23"
(58.4 cm)
1"
(2.5 cm)
3-1/2"
(8.9 cm)
22-1/2" (57.2 cm)
Grab Bar
42" (106.7 cm)
Grab Bar
39" (99.1 cm)
Grab Bar
Backer board locations
Note: Right and left end walls are
the same, only mirrored.
18" (45.7 cm)
Grab Bar
Product Diagram
ADVANTAGETM
ADVANTAGETM 48″ (121.9 cm) SEATED BASE, WALL SURROUND & BACKER BOARDS
Page2of2
1061194-4-
C