Use and Care Guide

Technical Information
Model door maximum width door maximum
height
62020100 33-1/2″ (85.1 cm) 67″ (170.2 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
62020100
34" (86.4 cm)
36" (91.4 cm)
5" (12.7 cm)
45"
(114.3 cm)
16-1/2"
(41.9 cm)
18"
(45.7 cm)
7"
(17.8 cm)
6-1/4"
(15.9 cm)
73-1/4"
(186.1 cm)
1-5/8"
(4.1 cm)
1-1/4"
(3.2 cm)
2-7/8"
(7.3 cm)
10" (25.4 cm)
10" (25.4 cm)10" (25.4 cm)
35-1/4"
(89.5 cm)
8"
(20.3 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
36" (91.4 cm) Min.
36-1/8" (91.8 cm) Max.
4" (10.2 cm)
16-1/4"
(41.3 cm)
16"
(40.6 cm)
18"
(45.7 cm)
Recommended Roofing
Nail Locations (4 total)
26"
(66 cm)
3-5/16" D.
(8.4 cm)
Drain Hole
Product Diagram
ADVANTAGETM
ADVANTAGETM 36″ (91.4 cm) SHOWER RECEPTOR AND WALL SURROUND
Page2of2
1038464-4-
D