Specification

Technical Information
Fixture*: basin area top area
Bathing well 42″ (106.7 cm) x
23″ (58.4 cm)
51″ (129.5 cm) x
32-1/2″ (82.6 cm)
To overflow water depth capacity
11-1/4″ (28.6 cm) 56 gal (212 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
All *60″ (152.4 cm) *NA
* Varies with alternative walls.
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
When using the optional apron, use either the nailing-in flange
on the apron or the three backing blocks to secure the apron.
60" (152.4 cm)
42" (106.7 cm)
60" (152.4 cm)
18-1/8"
(46 cm)
16-1/2"
(41.9 cm)
14"
(35.6 cm)
14"
(35.6 cm)
21"
(53.3 cm)
10"
(25.4 cm)
13"
(33 cm)
43-1/2"
(110.5 cm)
29"
(73.7 cm)
8"
(20.3 cm)
4"
(10.2 cm)
2" (5.1 cm) D. Drain
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
30" (76.2 cm) 30" (76.2 cm)
Drain Cutout
1-1/2" (3.8 cm)
Recommended Support
Clip or Roofing Nail
Location (5 Total)
Backing Block
Block Locations (3)
Optional When
Apron is Used
41-3/16"
(104.6 cm)
61050100
4-3/4" (12.1 cm)
Overflow Detail
Product Diagram
TRANQUILITY
®
TRANQUILITY
®
42″ (106.7 cm) OVAL BATH
Page2of2
1019810-4-
D