Installation Sheet

To Outside
B
Length = A - 1/32" (1 mm)
Screw Cover
Screw Cover
#8-18 x
1-1/2"
x2
x2
3
2
1
Notch
x2
Tin Snips
Miter Box
3/16", 5/16", 5/16" Masonry
32 Teeth Per Inch Blade
Masking Tape
100% Silicone Sealant
1093634-09**
1093634-08** (White)
Bottom Track
Towel
Bar*
Inside-Panel
Guide*
S11134.01 (Silver)
S11134.02 (Brass)
S11134.08 (White)
S11134.14 (Matted Silver)
S11134.17 (Nickel)
Top Track
Outside Panel*
Wall Jamb*
Inside Panel*
Series Number
Label
1077762
Anchor
1048208-C (Silver)
1048208-F (Brass)
Screw
#8-18 x 1-1/2"
1081001
Bumper
1052906-A
Screw
#8-32 x 3/8"
1080398**
Rear
Bushing
1080399
Pile Seal
1080397
Front
Bushing
1031943**
Screw Cover
1022794**
Bracket
676200
Tape
172818
Roller
1048208-B (Silver)
1048208-K (Brass)
Screw #8-18 x 3/8"
1093629**
Hardware Skin Pack
1048208-H (Silver)
1048208-J (Brass)
Screw
#8-18 x 3/4"
A
Length = A - 1/4" (6 mm)
1/4" (6 mm)
Bottom
Groove
Correct Incorrect
Measure distance “A.” Subtract 1/4” (6 mm)
from “A” and cut the bottom track.
File the bottom-track edges to fit curved corners
of the shower or bath unit.
Center the bottom track on the ledge with the
leg to the outside. Tape in place and mark the
position.
IMPORTANT! The bottom track and wall jamb
must sit flat against the shower ledge and the
wall. If needed, trim and file the wall jamb. Use a
coin to match and to transfer the corner radius of
the shower to the wall jamb.
Plumb both wall jambs. Mark the screw holes.
Remove the wall jambs. Drill 5/16” holes into the
walls and insert the anchors.
Apply sealant in the groove on the underside of
the bottom track. Secure the track to the ledge.
Secure both wall jambs with screws. Attach a
bumper only to the middle location.
Check the bumpers for the correct horizontal
alignment with the wall jambs.
Measure distance “B” above the jambs. Subtract
1/32” (1 mm) from “B” and cut the top track.
5900 Series Sliding Shower and Bath Doors
Sliding Bath Doors Sliding Shower Doors
11157979-2-E
USA/Canada: 1-800-STERLING (1-800-783-7546)
México: 001-877-680-1310
1157979-2-E
Installation and Care Instructions
Required Tools Parts Identifi cation
2 3 4
7 86 9
1 5
10
SterlingPlumbing.com
WARNING: Risk of serious injury. Damage prior to installation can
result in glass shattering. Inspect the glass and all parts for damage
before installation.
WARNING: Risk of serious injury. Improper installation can result
in glass shattering. Follow all installation instructions.
WARNING: Risk of serious injury. Do not cut tempered glass.
Tempered glass will shatter if cut.
WARNING: Risk of serious injury. Shower door and side panels
can shatter. Regularly inspect the glass and all parts for damage,
missing, or loose parts.
WARNING: Risk of serious injury. Always wear safety glasses
while cutting and drilling.
IMPORTANT! Do not touch the edges of the tempered glass with tools or
any other hard objects. Do not set the unframed tempered glass directly on
the floor or any hard surface.
IMPORTANT! Leave this manual for the end user.
Read these instructions before installing or using this product.
IMPORTANT! Do not cut the top track the same length as the bottom track.
NOTICE: The warranty does not apply to a product that has been modified
or altered in a manner other than as expressly permitted in the Installation
and Care Guide.
Walls must be within 3/8” (10 mm) of plumb.
Cover the drain with tape to avoid loss of small parts.
Follow the silicone sealant manufacturer’s instructions for application and
curing time.
To watch this installation video online, visit www.sterlingplumbing.com.
For care and cleaning and other information; visit
www.sterlingplumbing.com/care-and-cleaning.
Critical Information!
Read Before Installation!
Read and follow all instructions.
*Need help? Contact the STERLING Customer Care Center
at 1-800-STERLING (1-800-783-7546).
For service parts information, care and cleaning, and
other information, visit www.sterlingplumbing.com
**Finish/color code must be specifi ed when ordering.
Retain this document for future servicing.
Record model number from box for reference.
Model Number:______________