Instructions / Assembly
1. Unplug extension cord from the wall outlet.
2. Unplug each section of extension cord, keep each stack of light sets
connected together.
3. Gently lift off the top and middle sections, and remove the bottom section
from the tree stand.
4. Carefully replace the tree in its box and seal with tape, store box in a cool
dry place where the temperature does not exceed 100
o
F.
Basic precautions should be followed:
HOW TO REOTECT THE PRODUCT……..
(a) Read and follow all safety instructions, then save these instructions.
(b) Should you discover any of this:
1. Cut, damaged or frayed wire insulation.
2. Cracks in the lamp holder or enclosures.
3. Loose connections or exposed wires.
Then return the product or contact the service agent.
(c) Inspect product carefully before using or reusing.
(d) When it is not in use, store neatly in a cool, dry place and avoid direct sunlight.
(e) Do not close doors or windows while using product as this may damage the wire insulation.
(f) Do not use this product for other than its intended propose, use it as indoor decoration.
WHEN YOU LEAVE…….
(g) Pull the plug out when leaving the house, retiring for the night, or left it unattended for
your safety.
(h) Do not rest lamps on the cord or any wire.
DON’T LET ME NEAR……..
(i) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and
electric shock, it should not be played during set-up and take-down.
(j) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar
source of heat.
(k) Do not cover the product with clothes, papers or any material not part of the product
when it is being used
(l) Do not hang ornaments or other objects on cord, wire, or light string. Hang ornaments
only on the tree itself.
IF PLUG DOES NOT FIT……..
(m) The product has a polarized plug (one blade is wider than the other) as a feature to reduce
the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, please reverse the plug. If it still doesn’t work, please
contact a qualified electrician. Do not use with an extension cord unless the plug can
be fully inserted and do not replace the plug.
IF FUSE BLOWS…….
(n) This product employs an overload protection (fuse). A blown fuse indicated an
overload or short-circuit situation. If the fuse blows, please pull the plug out. Also
unplug any additional strings or any parts come with the product. Replace the fuse
as per the user servicing instructions (follow product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may be present
and the product should be reviewed to determine the cause of this.
4. Shape the branches. Start with tips
farthest from the pole, one to the right,
one to the left and one at the center
of the main stem.
3. Allow branches to fall into place or gently pull up
and out. When adjusting branches be sure that
all wires are free of branches hinges.
5. Follow the previous step after shaping the whole tree, step back
and take an overall look at the tree, shift branches to fill any gaps.
Slightly upsweep all branch tips for a uniform look. Your tree is ready
to decorate and enjoy.
STORAGE
IMPORTANT SAFETY INSTRUCTIONS
6. Now locate the long extension cord and plug it into the wall outlet.
Then plug the middle extension cord into the bottom extension cord.
Lastly, plug the light set from the top into the middle. As shown in
diagram, and now your tree showed be completed with all lights
illuminated.
(4)
(1)
side
view