Instructions / Assembly

Replace the lamp.
(1)Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
(2) Pull lamp and plastic base straight out of lampholder.
(3) Replace lamp with 2.5 volt bulb only, which has been
provided to you.
Replace the fuse.
(1) Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on cord.
(2) Open fuse cover. Slide to open fuse access
cover on top of attachment plug towards
blades.
(3) Remove burned fuse carefully. Then pu
a new fuse into fuse holder.
(4) Risk of fire. Replace fuse only with 3Amp.
125Volt Fuse (provided with product).
(5) Close fuse cover. Slide to close fuse
access cover on top of attachment plug.
Do not replace attached plug and make
sure a safety device(fuse) won’t be removed.
Discard product if the attached plug is
damaged.
ASSEMBLY
USER SERVICING INSTRUCTIONS
SAFETY INSTRUCTIONS FOR PRE-LIT
CHRISTMAS TREE
1. Before you start to assemble your tree. Please choose a location
where nearby a wall outlet. Place the tree stand on a level ground.
2. Carefully insert the bottom section into the stand. Make sure pole is
firmly inserted into stand and tightened screws.
Then insert middle section into bottom and top into middle.
Burned fuse
Do not twist lamp
Pull straight out
Push straight in!!
New fuse
Grip the plastic part
instead of glass.
(3) (2)