Installation Instructions

12. Complete the Installation
NOTE: Thoroughly clean all dust, dirt, or grease from the bottom track and shower ledge surfaces where
sealant will be applied. Make sure the surfaces are dry.
IMPORTANT! Carefully follow the silicone sealant manufacturer’s instructions for application and curing
time.
NOTE: When applying silicone sealant, tape the area and use alcohol pads or denatured alcohol for
cleanup.
Apply 100% silicone sealant to the seams as shown.
Dry fit the caps. Check fit.
Trim the excess portion as shown for a tight fit.
Apply a small amount of silicone sealant to the top of the wall jamb.
Install the cover to the top of the wall jamb.
Care and Cleaning
For best results, keep the following in mind when caring for your STERLING product:
Use a squeegee following each shower to eliminate water spots on the inside of the glass panels.
For glass surfaces, use a quality glass cleaner and a clean cloth to clean the mirror surface. Carefully
follow the glass cleaner manufacturer’s instructions.
Occasionally wipe the doors with a mild detergent diluted in water to keep the glass panels and
anodized aluminum parts looking new.
Apply silcone
sealant.
Sterling 15 1280803-2-B