Installation Instructions

9. Install the Door Panel
Verify the roller brackets with the adjustment screw are installed to the top of the door panel. If
needed switch the brackets.
From inside the shower or bath, lift the door panel into place and position the top rollers on the top
track.
Align the bottom rollers with the bottom track.
Push the button on the bottom rollers and engage them with the bottom track.
Adjust the top rollers using the adjustment screws until the bottom rollers easily engage into the
bottom track.
Check the door panel for smooth operation.
If needed adjust the rollers using the adjustment screws until desired operation is achieved.
Lock the top roller assembly in place by turning the tab 90 degrees.
Locked
Push
Button
Adjustment
Screw
1280803-2-B 12 Sterling