Instructions / Assembly



STORAGE:
(1)Unpluglightcordfromthewalloutletandremoveallornamentsanddecorations.
(2)Unplugeachsection.
(3) Gentlylift off the treetop and remove the bottomsection fromthe treestand.Carefullyplace the
tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA OR IN AN AREAWHERE THE
TEMPERATUREEXCEEDS100
0
F.

TROUBLESHOOTINGINSTRUCTIONS
IfLightsDoNotWork:
1. Checkwhethertheplugisproperly pluggedintotheoutlet.
2. Besurethereispowertotheoutlet.
3. Checkwhetherallplugswithinthetreearesecurelyconnected.
4. Check whether all bulbs are tightly inserted into lampholders and replace any missing or broken
bulbs.
5. Checkthelight string fusein the section plug thatis out, butunplugtree first. Ifthe fuse is blown
(seeifwireinsideisintactorglassisblown).Replacetheblownfusefollowingthediagram.Thereisa
sparefuseincludedforeasyreplacement.


Ifabulbdoesnotwork:
a. Firstremovethebulbandmakesurethewiresareoneithersideofthebulbadaptorsothattheywi ll
contactwiththebrassinsidethelampholdersandreinsert.
b. If bulb still does not light, it is blown, remove the bulb and replace only with the supplied
replacementbulbsfollowing
thediagrambelow.







   





FLAMERETARDANT MADEINCHINA


 Page2of2