Instruction Manual

Screw Compressor Central Chiller Chapter 4: Operation 43
Operating Chiller Pumps
To turn on and off the pumps, start from the Main Menu, then:
1. Press the or buttons to highlight either “CONFIGURATION MENU”.
2. Press ↵
3. Highlight “PUMP ENABLES”
4. Press ↵
5. Highlight the pump you want to operate.
The Pump Enables Screen appears
Pump Enables Screen
Any pump that is disabled to the OFF-LINE position will not be called to operate. Simply
toggle the F1 key on the enable/disable screen to toggle the state of the pump from the ON-
LINE to OFF-LINE state.