Instruction Manual

Screw Compressor Central Chiller Chapter 4: Operation 41
Configuration Menu Screen
This screen allows the operator to configure the settings for the compressors, pumps, chiller
setpoint, and high and low temperature alarm setpoints.
Operating the chiller compressors
To enable or disable the individual compressors, start at the Main Menu, then:
1. Press the or buttons on the right side of the screen to highlight
“CONFIGURATION MENU”
2. Press the ↵ button
The configuration menu screen displays:
Chiller Configuration Screen
3. Press the or button to highlight either “CIR 1 COMP ENABLES” or
“CIR 2 COMP ENABLES”
4. Press the ↵
The compressor enable screen displays: