Instruction Manual

REVISION 9/04 BJF
9
INTRODUCTION
THANK YOU for purchasing an STERLING 2000-SERIES GRANULATOR.
READ THIS MANUAL to learn how to operate and service your granulator safely. It covers the
family of granulators called the 2000 Series. This series of STERLING Granulators is designed
for the big jobs in reclamation of thin-walled, injection-molded plastic parts, thermoforming
sheet, as well as film.
*NOTE: This manual covers light maintenance only. No further maintenance should be
performed without first contacting the STERLING Service Department at the mailing address and
phone number shown below.
When calling the factory for service information or for parts, please have the model and serial
number of your machine on hand. The serial number is stamped on the plate mounted on center at
the back of the granulator just below the hopper.
ADDRESS, PHONE & FAX NUMBERS:
Sterling
2900 S. 160
th
Street
New Berlin, WI 53151
Telephone: [phone]
Fax number: 262-641-8653