Instruction Manual

REVISION 9/04 BJF
39
SETTINGS AND ADJUSTMENTS
SECTION 4-9
Adjusting or Replacing Bed Knives
FASTEN THE CUTTING CHAMBER
Raise the hold-down clamps to their
upright positions
Turn the knobs clockwise until they are
tight against the chamber housing.
CLOSE THE CUTTING CHAMBER SAFETY INTERLOCK
Engage the safety interlock by turning the actuator screw clockwise with a box wrench or a ratchet
wrench
Make sure the screw is fully seated against the surface of its housing.
When engaged, the interlock closes the electrical control circuit to the motor and allows the machine to run.
RESTART THE GRANULATOR
If necessary to replace the fuses, call an electrician to do it.
UNLOCK AND TURN ON the main power.
Remove the OUT OF SERVICE tag.
Be sure the rotor lock mechanism is not engaged.
Start the granulator by depressing the start pushbutton on the electrical cabinet.