Instruction Manual

REVISION 9/04 BJF
32
SETTINGS AND ADJUSTMENTS
SECTION 4-2
Adjusting or Replacing Bed Knives
OPEN THE CUTTING CHAMBER
INTERLOCK
Disengage the interlock actuator screw with
a box wrench or a ratchet wrench.
Make sure the end of the interlock actuator
screw is visible and clear of any contact.
When disengaged, the interlock opens the
electrical control circuit to the motor and
prevents the machine from running.
RELEASE THE CUTTING CHAMBER FASTENERS
Turn the hold-down clamps counterclockwise to loosen them.
Swing the hold-down clamps toward you until they are disengaged from the cutting chamber
housing.