User guide

AccuMeter Controller Chapter 7: Setting the IP Address for the AccuMeter Display 44
Chapter 7: Setting the IP Address for the
AccuMeter Display
The IP address of the AccuMeter Display is not part of the program and must be configured on
a new unit by accessing the terminal settings menu from the PanelView Plus CE. By default
you should set it to 192.168.5.104 unless you are tying this unit into your existing plant
network (refer to your IT department for details)
1. When the PanelView Plus CE should automatically take you to the RSVIEW ME
Station setup. If it doesn’t (give it a little time first) then double touch on the RS View
ME Station icon.
2. Touch “Terminal Settings”