User guide

AccuMeter Controller Chapter 5: Programming a New PLCs IP address 39
13. Select one of the requests in the Request History window and select the Add to Relation List
button. That will open a window which will automatically import the MAC address of the
Processor. Type in 192.168.5.103 for the IP address (if you are using a tying this into your plant
network and are using a different IP subnet then consult your IT department). Then click on the OK
button.
14. In the Request History window the MAC Address has the IP address reported back to the server.
Also below in the Relation List it will show the MAC to IP relationship. Highlight in the Relation
List in the lower pane by clicking on it. Then CLICK “DISABLE BOOTP/DHCP” button.