User guide

AccuMeter Controller Chapter 2: Functional Description 13
Chapter 2: Functional Description
2-1 Models Covered in This Manual
This manual provides operation, installation, and maintenance instructions for continuous loss-
in-weight blenders of various blending rates and specifications. See Figure 1 below for a list of
available models and specifications.
Figure 1: Models Covered by this Manual (√ - Denotes Availability)
Model
AMP
AMC AMF
2 components
√ √ √
3 components
√ √ √
4 components
√ √ √
6components
√ √ √
Blending Capability
8 components
√ √ √
Maximum blending rate in lbs./hr .(kgs./hr) ℵ Up to 16,500
(7500)
Up to16,500
(7500)
Up to 2,500
(1,100)
ℵ Actual rates will vary. Consult the factory for guaranteed blending rates.
Model numbers are listed on the serial tag. Make sure you know the model and serial number of
your equipment before contacting the manufacturer for parts or service.
Blending systems are as varied as the applications they are designed for. All continuous loss-
in-weight blenders are sized to meet the specific requirements stated by the customer at the
time of purchase, and future changes may require a modification to the original system.
2-2 General Description
All blenders are designed to blend plastic pellets and regrind, and supply the blended material
to the extruder. The standard system is not designed to blend powder or any other no-free-
flowing materials. Consult the factory if your future process requirements require the
addition of these materials.
Accessories
The manufacturer offers a variety of options for these blending systems, including mezzanine
stands, agitated regrind supply and weigh hoppers, etc. All accessories are designed and
manufactured to ensure proper results for your application.
Customer Service
The intent of this manual is to familiarize the operator and maintenance personnel with these
blenders and help your organization get the maximum service from your equipment. If you
have any questions regarding installation, service, repair, custom equipment, or applications,
please do not hesitate to contact us for the information required. Prices for additional
equipment, accessories, or repair parts will be furnished promptly upon request.
Note: If you desire to use a blender for an application other than that for which
it was purchased, please contact your sales representative or our factory
to verify compatibility of the equipment with the new process.
Misapplication of the equipment could result in injury to the operator or
damage to the equipment.