Owner manual

Page v of 48
Table of Contents
1 Safety Considerations 8
2 General Information 11
2-1 Introduction 11
2-2 Necessary Information 11
2-3 Description 12
2-3-1 Infeed Chute 13
2-3-2 Cutting Chamber 13
2-3-3 Drive System 14
2-3-4 Discharge System 14
2-3-5 Base 14
2-3-6 Specifications 14
3 Shipping Information 15
3-1 Unpacking and Inspection 15
3-2 In the Event of Shipping Damage 15
3-3 If the Shipment is Not Complete 15
3-4 If the Shipment is Not Correct 16
3-5 Returns 16
3-6 Uncrating the Equipment 16
4 Installation 18
4-1 Electrical Connections 18
4-2 Preparing the Machine 18
4-3 Start-Up Checks 19
4-3-1 Check the Cutting Chamber 19
4-3-2 Check the Knife Bolts 19
4-3-3 Check the Motor Rotational Direction 19
4-3-1 Check the Airveying System 20
5 Operation 21
5-1 Introduction 21
5-2 Start-Up Procedure 21
5-3 Feeding the Granulator 22
5-4 Machine Shut-Down 22
6 Maintenance 23
6-1 Introduction 23
6-2 Preventative Maintenance 23