Owner manual
Page 20 of 48
If the direction is incorrect, perform the following procedure:
1. Shut the power off and disconnect the incoming power supply.
2. Reverse any two of the three power line connections to the
machine.
3. Re-connect the incoming power supply line and turn the Main
Power switch to On.
4. Re-check the motor drive rotation.
4-3-1 Check the Airveying System
If your machine is fitted with an airveying system, the following
additional operations must be performed:
1. Press the Airveyor Start button, located at the blower motor.
2. Check that the blower motor is rotating in the proper direction
shown by an arrow.
If the blower motor is rotating in the incorrect direction, perform
the following procedure:
1. Shut the power off, and disconnect the incoming power supply
line.
2. Reverse any two of the incoming power line connections to the
blower motor.
3. Reconnect the incoming power supply line, turn the Main
Power switch to On, and re-check the blower motor rotation.