Instruction Manual

Page 34 2016-C Series Hot Oil Portable Temperature Control Units
returns to the Center Default position when in AUTO mode. The
switch stays in the Maintained position in Manual Cooling mode.
! CAUTION
Always let the pump run for at least one (1) minute
before switching to AUTO mode.
Never switch to AUTO mode when filling or venting the
unit, except as described in the Unit Startup chapter.
Improper switching can seriously damage the heater,
as it could become energized with air in the system.
Alarm Silence
Press the ALARM SILENCE button to silence the audible alarm
on the console.
! CAUTION
After you silence the alarm, make sure you locate and
correct the alarm condition before continuing with unit
operation.