User Manual

1 Model
96C Standard
2 Size
050 1/2" (DN15)
075 3/4" (DN20)
100 1" (DN25)
3 Body Material
6L 316L
Mark 96C SerieS Sanitary PreSSure regulatorS
orDering schematic
96C/1113/AB
Steriflow, a division of Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
sterifl[e-mail] • www.steriflowvalve.com
Steriflow Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our
website at www.steriflowvalve.com for the latest information on our products.
4 Body Finish
A 20Ra (SFV5) Interior/63RMS Exterior (Std)
B 20Ra (SFV5) Interior/20Ra Exterior
C 8Ra Interior/63RMS Exterior
D 20Ra (SFV5) Interior/8Ra Exterior
E 8Ra Interior/8Ra Exterior
F 8Ra Interior/20Ra Exterior
1
—
2
—
3
1
4 5 6 7 8 9 10 11 12
5 Body Cv (Kv)
Cv Kv
B All 1/2" All 1/2"
A 0.5 (1/2", 3/4" & 1") 0,43 (1/2", 3/4" & 1")
C 1.5 (3/4" & 1") 1,3 (3/4" & 1")
F 2.5 (1") 2,15 (1")
L 5.5 (1") 4,7 (1")
6 Trim Finish
A 20Ra (Standard)
B 8Ra
7 Trim – Cv (Kv) & Seat
3 0.3 (0,24) Hard Seat B 2.5 (2,15) Hard Seat
4 0.3 (0,24) PEEK Seat C 2.5 (2,2) Teon Seat
5 0.5 (0,43) Hard Seat D 2.5 (2,15) Jorlon Seat
6 0.5 (0,43) PEEK Seat L 5.5 (4,7) Hard Seat
Y 1.2 (1,03) Hard Seat M 5.5 (4,7) Teon Seat
1 1.2 (1,03) PEEK Seat N 5.5 (4,7) Jorlon Seat
A 1.5 (1,3) Hard Seat
8 O-Ring/Diaphragm
EE EPDM/EPDM Diaphragm 1.5-5.5Cv
TY Teon Encaps. Viton/Jorlon Diaphragm 1.5-5.5Cv
E5 EPDM/EPDM Diaphragm 0.3-1.2Cv
B5 Buna-N/Jorlon 0.3-1.2Cv
V5 Viton/Jorlon Diaphragm 0.3-1.2Cv
S5 Silicon/Jorlon Diaphragm 0.3-1.2Cv
10 Range PSI (Bar) see chart on page 2
A 3 - 8 (0,2 - 0,6)*
C 5 - 25 (0,3 - 1,7)
H 15-50 (1,0-3,4)
R 40-90 (2,8-6,2)
T 75-135 (5,2-9,3)
9 Adjusting Screw Finish (Except Threads)
A Electro-polished (Standard)
B 20Ra (SFV5)
C 8Ra
11 Diaphragm
EP EPDM 1.5-5.5 Cv
JL Jorlon 1.5-5.5 Cv
E5 EPDM 0.3-1.2 Cv
J5 Jorlon 0.3-1.2 Cv
UJ Ultra-thin Jorlon
12 Actuator Finish
AA Standard
BA 20Ra (SFV5) exterior
CA 8Ra exterior
13 PED Compliance
00 Not Required
0G SEP Compliant
ZZ Non-Standard
Note: Steriow does not recommend using metal seated
trim on any service where the ow will be deadheaded
downstream of the pressure reducing regulator. Use an
appropriate Teon, Jorlon or Peek soft seat for the trim
instead.
* Must use EPDM or Ultra-thin Jorlon diaphragm