User Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
sterifl[e-mail] • www.steriflowvalve.com
Mark 96C Series
Sanitary Pressure Regulators (1/2"–1")
The Mark 96C is a clamped body pressure reducing
valve designed to regulate downstream pressure of
process and utility applications in sanitary and aseptic
systems.
The Mark 96C operates by sensing pressure under the
diaphragm after the medium has entered the valve from
the bottom inlet port. As the downstream pressure ap-
proaches the set point, the force caused by the pressure
acting on the diaphragm overcomes the force of the
range spring, and the plug begins to move up toward
closed. This reduces the downstream pressure and
maintains the set point as the ow exits the valve from
the side port. If the pressure underneath the diaphragm
begins to fall, the spring forces the plug to move down
towards open, to allow the set point to be maintained.
Features
• CRN Registration Number Available
• Soft seat capability for ANSI Class VI shutoff
• No guiding surfaces in the uid – prevents particu-
late generation
• 100% 316L barstock body and metal trim
• Self-draining design
• No threads in contact with service media – prevents
accumulation of contaminants
• Easy to disassemble for cleaning
• Clean-in-Place, Steam-in-Place – dome lock pin to
allow CIP/SIP
• Jorlon diaphragm: A USP Class VI, FDA approved
PTFE based material which provides excellent chemi-
cal resistance, extremely long life in steam service.
Far superior to other elastomer or metal diaphragm
metals.
Documentation
The following documentation is available, free of charge,
from our factory upon request at time of ordering:
• Traceable Material Certicates (free of charge for
body and ferrules)
• FDA or USP Class VI certicates on most soft seal
materials
• Final Test Reports
• Certicate of Surface Finish
• Certicate of Compliance/Certicate of Origin
available Finishes
Body
• Standard: 20 Ra mechanical nish and
electropolish on inside wetted surfaces;
machine nish and electropolish on exterior
• Optional: 20 Ra mechanical nish on
external surfaces; 8 Ra nish on internal or
external nishes
Stem
• Standard: 20 Ra mechanical nish and
electropolish
• Optional: 8 Ra nish
Spring Housing
• Standard: electropolished
• Optional: 20 Ra mechanical nish on exter-
nal surfaces; 8 Ra nish on external surfaces
on all sizes
Adjusting Screw
• Standard: electropolished
• Optional: 20 Ra mechanical nish; or 8 Ra
nish on non-thread portion
applications
A wide variety of applications exist for the
MK96C in the pharmaceutical, biotech, health-
care, food & beverage and other industries.
The Mark 96C is suitable for liquid, gas and
steam service
Sanitary Valves Mark 96C Sanitary Pressure Regulators
CRN Registration Number Available