Manual

-4-
Mark 95 SerieS Sanitary Back PreSSure regulatorS
Dimensions
sample speciFication
Stainless steel sanitary back pressure regulator body and wetted components shall be made from
316L, ASTM A479, S31603 barstock material. Regulator shall be activated by FDA approved, USP
Class VI certied Jorlon diaphragm with lifetime guarantee. All guiding of valve stem/plug shall be out-
side of the wetted, process areas, above diaphragm. Regulator shall be free of threads within wetted,
process areas of valve internal and shall be self draining when installed with outlet vertical and below
valve assembly.
D
B
C
A
Outlet
Inlet
Valve
Size
Dimensions (inches)
Weight
Lbs
A B C D
1/2" 3.29 8.00 1.37 5.70 18
3/4" 3.29 8.00 1.50 5.70 18
1" 4.00 8.00 1.64 5.70 20
1-1/2" 4.21 10.50 2.53 7.25 40
2" 5.34 17.50 2.96 9.50 90
3" 5.34 18.00 3.46 9.50 98
Valve
Size
Dimensions (mm)
Weight
Kgs
A B C D
DN15 84 203 35 145 8,1
DN20 84 203 38 145 8,1
DN25 102 203 42 145 9,1
DN40 107 267 64 184 18
DN50 136 445 75 241 41
DN80 136 457 88 241 44,4
Based on US tri-clamp ends. Consult factory for DIN and ISO tri-clamp
end dimensions
3/4" Tri-C
@ 180°
(95-XXX-6L-180)
3/4" Tri-C @ 90°
(95-XXX-6L-90)
Inlet @ 0°
(95-XXX-6L)
Example: (95-XXX-6L-90)
3/4" Tri-C
@ 270°
(95-XXX-6L-270)