User Manual

Steriow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
steri[e-mail] • www.steriowvalve.com
Mark 90 Series
Cavity-Filled Three Piece Ball Valves
The Mark 90 Series is a sanitary ball valve de-
signed with FDA-approved cavity ller seats and
Tri-clamp ends to minimize pockets where media
can collect. The inner diameters and end con-
nections are exactly the same size as the ID of
the ball/seat ensuring no obstruction of ow from
tubing through the valve.
Fe a t u r e s
In sizes from 1/2" (DN15) through 4" (DN100) •
with "tube ID design" to provide unobstructed
ow and better drainage
Pressure ratings up to 900 psi (62,5 bar)•
Virgin Teon cavity ller•
Internal nish to 25 Ra•
Lockable handle prevents accidental opening or •
closing of valve
ISO 5211 actuator mounting ange•
Designed for simple maintenance with in-line •
repairable feature
Anti-blowout stem•
Spring-loaded stem seal – no threads in packing •
chamber
No sharp internal llet radius – for smooth nish•
Tri-clamp or tube weld ends•
Available as manual or actuated (pneumatic/•
electric) valve
In d u s t r I e s a n d ap p l I c a t I o n s
The Mark 90 is designed for applications in
the following industries and applications:
Pharmaceutical•
Healthcare/Cosmetics•
Food & Beverage•
Specialty Chemical•
Low Pressure Clean Steam•
Puried Water•
SIP/CIP•
Process Gases (N•
2
, CO
2
)
Clean Air Systems•
Viscous Media•