Owner manual

-8-
JSRLP SeRieS HigH PuRity Bio-PHaRma gaS Low PReSSuRe Reducing VaLVe
Flow conFigurations
sample speciFications
Stainless Steel pressure regulator shall be made from ASTM A479 barstock material, which includes body
and all wetted metal parts. Regulator shall be activated by an un-tied, FDA approved, USP Class VI certi-
ed Jorlon diaphragm. Regulator shall be free of exposed threads within wetted process area and valve
internal to hold minimal media volume. Regulator shall be direct acting and have a diaphragm area of no
less than 18.75" to enable low set point offset. Regulator shall have trim that can be replaced inline without
dome/spring chamber disassembly. Regulator shall reliably control outlet pressures as low as 1 psig.
outlet inlet
outlet gage
inlet gage
* Gage ports are 1/4" FNPT (consult factory for required alternative)
Consult factory for other porting options
A B
D E
outlet inlet
outlet inlet outlet inlet
inlet gage
outlet gage
outlet gage
outlet inlet
SAMPLE
C
outlet inlet
270°
90°