Owner manual
-3-
JSRLP SeRieS HigH PuRity Bio-PHaRma gaS Low PReSSuRe Reducing VaLVe
Features & BeneFits
SST spring chamber
suitable for washdown
Panel mount and
captured vent -
options available
FDA/USP Class VI
seat and seal and
material for ANSI
Class VI shutoff
Sanitary clamp,
extended tube weld,
or FNPT connections
available
Bottom mounting
(optional)
EPDM seat material
available for extremely
low lockup
Large Teon diaphragm FDA/
USP Class VI approved - for
accurate low pressure control
down to 1 psi
Fine thread pitch for
precision setpoint
adjustments
ASME BPE SF5, 20 Ra µin
(0.5 Ra µm) electropolish -
nish - standard on internal
surfaces and wetted parts
Reliable, gas pressure
regulation with set points to
1 psig (69 millibar)
Optional:
• Autoclavable annodized aluminum handle
• Handle lockout device
cV trim selection instructions
1. Select a graph on the next four pages that best represents your outlet pressure set point and ow range.
2. Select the inlet pressure line on the graph (horizontal sloped line, P1) that reects your valve's actual
inlet pressure.
3. That line indicates the Pressure/Flow capabilities of the Cv trim under owing conditions.