Owner's manual
JSRHF SeRieS HigH Flow BiopRoceSS clean gaS pReSSuRe Reducing ValVe
Flow conFigurations
sample speciFications
Stainless Steel pressure regulator shall be made from ASTM A479 barstock material, which
includes body and all wetted metal parts. Regulator shall be activated by an un-tied, FDA
approved, USP Class VI certied Jorlon
TM
diaphragm. Regulator internal to hold minimal
media volume. Regulator shall have one piece diaphragm subassembly, and trim that can be
replaced inline without dome/spring chamber disassembly.
outlet inlet
outlet gage
inlet gage
* Gage ports are 1/4" FNPT (consult factory for required Tri-clamp, VCR, or other alternative)
Consult factory for other porting options
A B
D E
outlet inlet
outlet inlet outlet inlet
inlet gage
outlet gage
outlet gage
outlet inlet
SAMPLE
C
outlet inlet
270°
90°
-5-