Owner's manual

ManualsBrandsSteriflow ManualsEquipmentJSRHF Series

Steriﬂow by Jordan Valve

3170 Wasson Road • Cincinnati, OH 45209

513.533.5600 • 800.543.7311 • 513.871.0105 (f)

steriﬂow@richardsind.com • www.steriﬂowvalve.com

JSRHF Series

High Flow Bioprocess Clean Gas Pressure Reducing Valves

The JSRHF Series high purity gas pressure regulator was

designed and built specically for Bio-Pharma gas applications.

Traditionally, manufacturers adapted their industrial gas

regulators for use in biopharm by simply changing the

construction materials and surface nish. Not so with the

JSRHF. It's been designed specically to minimize the

exposed threaded connections associated with those

traditional designs. And, it features an in-line removable trim

set to facilitate quick trim change out and cleaning without

valve removal or disassembly.

The durable valve body and metal trim components are

machined from ASTMA479 316L SST barstock and the in-

ternal components are nished to ASME BPE SF5 20Ra μin

(0.5 Ra μm), electropolished standard. The valve is

outtted with the rugged Jorlon diaphragm and Teon seats

and seals that are all FDA approved, USP Class VI

compliant materials. These materials of construction enable

JSRHF to withstand the rigors of SIP and CIP processes (if

required for valves used on liquid applications).

Features

• In-line removable seat and trim facilitate cleaning and

maintenance

• Barstock construction guarantees material integrity and

surface nish

• Minimized internal volume

• Proprietary Jorlon diaphragm material provides excep-

tionally long life, CIP/SIP capability, and FDA and USP

Class VI compliance

• Soft seat material for ANSI Class VI shutoff

• Can be used on continuous clean steam, and on non-

cavitating uids

Documentation

The following documentation is shipped with each order:

• Steriow Unicert

— Certicate of Material Compliance with MTR's and

Traceable Material Heat Number for body, ferrules

and wetted trim

— Certicate of Compliance to FDA and USP Class VI

— Certicate of Surface Finish

• Final Test Reports and Certicate of Origin available

upon request at time of order

surFace Finish

• ASME BPE SF5, 20 Ra μin (0.5 Ra

μm), electropolished – standard for all

internal and wetted metal parts.

External standard nish is 40 Ra μin

(1 Ra μm) electropolish

• Other nishes optional

• O

cleaning - optional

applications

Ideal for clean gases typically found in

bio-pharmaceutical, pharmaceutical and

food & beverage processes including:

• Clean Filter Air

• Nitrogen

• Carbon Dioxide

• Argon

• Oxygen

• Custom purge or blanket gas

Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves

Summary of content (6 pages)

PAGE 1
High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally, manufacturers adapted their industrial gas regulators for use in biopharm by simply changing the construction materials and surface finish. Not so with the JSRHF. It's been designed specifically to minimize the exposed threaded connections associated with those traditional designs.
PAGE 2
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valve Specifications Sizes: 3/4" - 2" (DN20 - DN50) Connection and gauge port ends: Tri-clamp, Tube weld end and NPT Standard.
PAGE 3
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valve Features & Benefits - MODEL JSRHF: 2.5 and 3.
PAGE 4
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valve Features & Benefits - MODEL JSRHF: 10 Cv One piece diaphragm sub assembly promotes quick, inline maintenance and fewer spare parts Rugged bolted spring housing eliminates potential bonnet compression failures due to inline vibration and insure diaphragm perimeter compression Five different color coded spring ranges allow you to select the optimum spring for your application to minimize droop Machine threads available on spring housing fo
PAGE 5
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valve Flow Configurations outlet gage A outlet B inlet outlet inlet outlet C inlet outlet gage inlet gage outlet gage D outlet 270° E inlet outlet inlet outlet SAMPLE inlet 90° inlet gage * Gage ports are 1/4" FNPT (consult factory for required Tri-clamp, VCR, or other alternative) Consult factory for other porting options Sample Specifications Stainless Steel pressure regulator shall be made from ASTM A479 barstock material
PAGE 6
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valve JSRHF/0514 Ordering Schematic Model Size Material JSRHF — 075 — 6C 1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 14 JSRHF Model High Flow Gas Pressure Reducing Valve 075 100 150 200 Size 3/4" (DN20) 1" (DN25) 1-1/2" (DN40) 2" (DN50) 6C 6N 6T Material / Connection Type 316L / Tri-Clamp 316L / NPT 316L / BWE 1&2 Body Feature Cv / Connection Size Port Configuration A 2.5 Cv (3/4)" A Port "A" B 3.