Manual
-4-
JSRH SeRieS HigH Flow Bio-PHaRma Clean gaS PReSSuRe ReduCing ValVe
Flow conFigurations
sample speciFications
Stainless Steel pressure regulator shall be made from ASTM A479 barstock material, which in-
cludes body and all wetted metal parts. Regulator shall be activated by an un-tied, FDA approved,
USP Class VI certied Jorlon
TM
diaphragm. Regulator shall be free of exposed threads within wet-
ted process area and valve internal to hold minimal media volume. Regulator shall have one piece
diaphragm subassembly, and trim that can be replaced inline without dome/spring chamber disas-
sembly.
outlet inlet
outlet gage
inlet gage
* Gage ports are 1/4" FNPT (consult factory for required Tri-clamp, VCR, or other alternative)
Consult factory for other porting options
A B
D E
outlet inlet
outlet inlet outlet inlet
inlet gage
outlet gage
outlet gage
outlet inlet
SAMPLE
C
outlet inlet
270°
90°