User Manual

ManualsBrandsSteriflow ManualsEquipmentJSR Series

Steriﬂow by Jordan Valve

3170 Wasson Road • Cincinnati, OH 45209

513.533.5600 • 800.543.7311 • 513.871.0105 (f)

steriﬂow@richardsind.com • www.steriﬂowvalve.com

JSR Series

High Purity Bio-Pharma Gas Pressure Reducing Valves

JSR is the rst high purity gas pressure regulator designed and

built specically for hygienic, ASME BPE gas applications.

Traditionally, manufacturers adapted their industrial gas

regulators for use in biopharm by simply changing the con-

struction materials and surface nish. Not so with the JSR.

It's been designed specically to eliminate the exposed

threaded connections and permanent contaminant traps

below the diaphragm. And, it features an in-line removable

trim set to facilitate quick trim change out and cleaning with-

out valve removal or disassembly.

The durable valve body and metal trim components are

machined from ASTMA479 316L SST barstock and n-

ished to ASME BPE SF5 (20Ra micro-inch, electropolished)

standard. The valve is outtted with the rugged Jorlon dia-

phragm and Teon, PEEK, or EPDM seats and seals that

are all FDA approved, USP Class VI compliant materials.

These materials of construction enable JSR to withstand the

rigors of SIP and CIP processes if required. And, the new

EPDM seat reduces lockup to less than 2.5 psig.

Features

• No exposed threaded connections below diaphragm

• In-line removable seat and trim facilitate cleaning and

maintenance

• Barstock construction guarantees material integrity and

surface nish

• High ow rate coupled with high rangeability reduces

need for reduced trim sizes

• Minimized internal volume

• Proprietary Jorlon diaphragm material provides excep-

tionally long life and CIP/SIP capability

• Soft seat material for ANSI Class VI shutoff

• Can be used on continuous clean steam, and on non-

cavitating ﬂuids.

Documentation

The following documentation is shipped with each order:

• Steriow Unicert

— Traceable Material Heat Number for body and

ferrules

— Certicate of Compliance to FDA and USP

Class VI

Certicate of Surface Finish

• Final Test Reports and Certicate of Origin available

upon request at time of order

surFace Finish

• ASME BPE SF5 (20Ra µ in (0,5 µm),

electropolished) – standard for all

external and wetted metal parts

• Other nishes optional

• O

cleaning - optional

applications

Ideal for clean gases typically found in bio-

pharmaceutical, pharmaceutical and food &

beverage processes including:

• Clean Filter Air

• Nitrogen

• Carbon Dioxide

• Argon

• Oxygen

• Custom purge or blanket gas

Sanitary Valves JSR Series Ultra-High Pressure Reducing Valves

CRN Registration Number Available

Summary of content (8 pages)

PAGE 1
CRN Registration Number Available High Purity Bio-Pharma Gas Pressure Reducing Valves JSR is the first high purity gas pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. Traditionally, manufacturers adapted their industrial gas regulators for use in biopharm by simply changing the construction materials and surface finish. Not so with the JSR.
PAGE 2
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valve Specifications Sizes: 1/2" (DN15) & 3/4" (DN20) Ends: Clamp, Weld-stub or NPT ends Soft Seat Materials for ANSI Class VI Shut-Off: • PTFE to +252°F (122°C) continuous or 275°F (135°C) intermittent [not to exceed 15 min.
PAGE 3
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valve Features & Benefits Autoclavable Anodized Aluminum Knob available as cataloged option Fine thread pitch for precision setpoint adjustments SST spring chamber suitable for washdown Jorlon Diaphragm FDA/USP Class VI approved – unsurpassed life ASME BPE SF5 (20Ra micro inch) finish – standard Optimized internal volume Metal trim components 100% 316L Sanitary clamp connections 1/2" – 3/4" No exposed threads below the diaphragm FDA/USP Class
PAGE 4
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valve Trim Flow (Cv) Selection Graphs To select a valve with the proper Cv: 1. Please note maximum inlet pressure, and seat temperature limitations on page 2. Select a seat material appropriate for that temperature and the gas flowing through the valve. 2. Convert pressure and flow units to those shown in the graphs below. 3. The sloped lines are the flow curves associated with either a 150 psi or 100 psi inlet pressure (P1).
PAGE 5
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valve Flow Configurations outlet gage A outlet B inlet outlet inlet outlet C inlet outlet gage inlet gage outlet gage D outlet 270° E inlet outlet inlet outlet SAMPLE inlet 90° inlet gage * Gage ports are 1/4" FNPT (consult factory for required alternative) Consult factory for other porting options Dimensions, In. (mm) 4.6 (116,8)* * Add 0.75" (19,1) for easy removal 1.3 (33,0) 3.31 (84,1) Weight: 3.
PAGE 6
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valve Ordering Schematic Model Size Material JSR — 050 — 6L JSR 1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 14 Model High Purity Gas Pressure Reducing Valve 11 & 12 SK 050 075 1/2" 3/4" 6L Material Stainless Steel 316L 1&2 Body Feature End Connection Port Configuration C Tri-Clamp 20 Ra EP A Port "A" P FNPT 20 Ra EP B Port "B" T BWE 20 Ra EP C Port "C" D Port "D" E Port "E" ZZ Non-Standard 3&4 Trim 1S 0.8 Cv 2S 0.5 Cv 1R CV 0.
PAGE 7
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valve Repair Kit Ordering Schematic Model JSR JSR Size 050 — — Model High Purity Gas Pressure Reducing Valve Size 050 075 1/2" 3/4" 6L Material Stainless Steel 316L Kit Material 6L Kit Repair Kit — Kit Kit 1&2 1P 3&4 SJ 1&2 1P 1T 1E 2P 2T 2E ZZ Trim/Seat Material Cv 0.8/PEEK Cv 0.8/PTFE Cv 0.8/EPDM Cv 0.5/PEEK Cv 0.5/PTFE Cv 0.
PAGE 8
JPURE/1113/1K/AB Steriflow, a division of Jordan Valve 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311 • 513.871.0105 (f) steriflow@richardsind.com • www.steriflowvalve.com Steriflow Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at www.steriflowvalve.com for the latest information on our products.