User guide

ManualsBrandsSteriflow ManualsEquipmentJSB Series

Steriﬂow by Jordan Valve

3170 Wasson Road • Cincinnati, OH 45209

513.533.5600 • 800.543.7311 • 513.871.0105 (f)

steriﬂow@richardsind.com • www.steriﬂowvalve.com

3L/T-2R/S33 Series

JSB Series

Back Pressure Regulating Valves for Bio-Pharma

Gas Applications

J-Pure is the rst fully drainable high purity gas back pressure

regulator designed and built specically for hygienic, ASME BPE

gas applications.

Traditionally, regulator manufacturers adapted their industrial

gas regulators for use in biopharm by simply changing the con-

struction materials and surface nish. Not so with the J-Pure

Series Model JSB.

• It's been designed specically to eliminate all threaded con-

nections and contaminant traps below the diaphragm.

• It is completely drainable out the inlet and outlet (an indus-

try rst in compact hygienic regulator design), and compat-

ible with CIP and SIP practices.

• The simple trim design facilitates quick trim change out and

cleaning without valve removal or complete disassembly.

The durable valve body and metal trim components are ma-

chined from ASTM A479 316L SST barstock and nished to

ASME BPE SF5 (20Ra micro-inch (0,5 Ra μm), electropol-

ished) standard. The valve is outtted with the rugged Jorlon

diaphragm and Teon or PEEK seats, all FDA approved, USP

Class VI compliant materials. These materials of construction

enable the JSB to withstand the rigors of continuous SIP and

CIP processes if required.

Features

• Fully drainable with no threaded connections, or contami-

nant traps below the diaphragm

• In-line removable seat and trim signicantly reduce mainte-

nance time

• Barstock construction guarantees material integrity and

surface nish

• High ow rate coupled with high rangeability reduces need

for reduced trim sizes

• Minimized internal volume

• Proprietary Jorlon diaphragm material provides exception-

ally long life and CIP/SIP capability, and FDA and USP

Class VI compliance

• Soft seat material for ANSI Class VI shutoff

Documentation

The following documentation is shipped with each order:

• Steriow Unicert

— Traceable Material Heat Number for body and ferrules

— Certicate of Compliance to FDA and USP Class VI

— Certicate of Surface Finish

• Final Test Reports and Certicate of Origin, O2 cleaning,

etc., available upon request at time of quote, or order

surFace Finish

• ASME BPE SF5 (20 Ra μin ,

electropolished) – standard for all

external and wetted metal parts

• Other nishes optional

• O

cleaning - optional

applications

Typically used in Biopharm or paren-

teral installations for modulating pres-

sure relief during lling, or other back

pressure applications. Ideal for clean

gases typically found in

bio-pharmaceutical, pharmaceutical

and food & beverage processes includ-

ing:

• Clean hygienic air

• Nitrogen

• Carbon Dioxide

• Argon

• Oxygen Sparge

• Custom purge or blanket gas

• Post SIP drying

Sanitary Valves JSB Series Back Pressure Valves

CRN Registration Number Available

Summary of content (6 pages)

PAGE 1
3L/T-2R/S33 Series CRN Registration Number Available Back Pressure Regulating Valves for Bio-Pharma Gas Applications J-Pure is the first fully drainable high purity gas back pressure regulator designed and built specifically for hygienic, ASME BPE gas applications.
PAGE 2
JSB Series Bio-Pharma Gas Back Pressure Regulating Valve Specifications Sizes: 1/2" (DN15) & 3/4" (DN20) Ends: Clamp, Weld-stub or NPT ends Soft Seat Materials for ANSI Class VI Shut-Off: • PTFE to +252°F (122°C) continuous or 275°F (135°C) intermittent [not to exceed 15 min.
PAGE 3
JSB Series Bio-Pharma Gas Back Pressure Regulating Valve Features & Benefits Autoclavable Anodized Aluminum Knob available as cataloged option Fine thread pitch for precision setpoint adjustments SST spring chamber suitable for washdown Guiding done above the wetted process ASME BPE SF5, 20 Ra μin (0,5 Ra μm) electropolish standard Jorlon Diaphragm FDA/USP Class VI approved – unsurpassed life Optimized minimal internal volume No cracks, crevices or threads below diaphragm Sanitary clamp connections
PAGE 4
JSB Series Bio-Pharma Gas Back Pressure Regulating Valve Trim Flow Graphs JSB Performance 0.5 Cv 140 50-125 psi Regulated Pressure (psi) 120 100 80 35-60 psi 60 40 8-40 psi 8-40 psi 20 0 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Flow (SCFM) JSB Performance 0.
PAGE 5
JSB Series Bio-Pharma Gas Back Pressure Regulating Valve Flow Configurations A outlet inlet gage outlet gage D E B inlet outlet inlet outlet inlet outlet gage outlet inlet inlet gage * Gage ports are 1/4" FNPT (consult factory for required alternative) Dimensions, In. (Mm) 5.21 (132,2)* * Add 0.75" (19,1) for easy removal 0.615 (15,6) 3.
PAGE 6
JSB/0614 JSB Series High Purity Bio-Pharma Gas Back Pressure Regulating Valve Ordering Schematic Model Size Material JSB — 50 — 6L JSB 1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 14 Model High Purity Gas Back Pressure Reducing 11 & 12 SK 050 075 1/2" 3/4" 6L Material Stainless Steel 316L 1&2 Body Feature End Connection Port Configuration C Tri-Clamp 20 Ra EP A Port "A" P FNPT 20 Ra EP B Port "B" T BWE 20 Ra EP D Port "D" E Port "E" ZZ Non-Standard 3&4 1S 2S ZZ Trim 0.8 Cv 0.