Instructions / Assembly

Self-adhesive Vinyl Repair Patch
1. Wipe the area to be repaired to assure it is dry and clean.
2. Be sure nothing is protruding. If the is any material protruding
it must be removed.
3. For large cracks and holes cut or place directly the Center Reinforcement
Patch. **Press firmly outside of the damaged area in order to properly
activate the adhesive.
4. Place the Self-Adhesive Vinyl Repair Patch material over the Center
Reinforcement Patch. **Press firmly outside of the damaged area in order to properly
activate the adhesive.
5. Paint to match if needed.
If you have any questions please call Stepsaver Products at 888-778-4537