Installation Guide

ManualsBrandsStep and Go ManualsBathEasy Breezy Non-electric Bidet Attachment in White

WARNING! PLEASE PLACE ALL THE PRODUCTS AT ROOM TEMPERATURE

AND DO NOT STORAGE THE BIDETS AND ITS ASSESSORIES IN THE

FREEZING TEMPERTURE ENVIRONMENTS UNDER 0 DEGREE CELCIUS!

1. NAMES AND FUNCTIONS OF PARTS

2. INSTALLATION

3. FINAL ASSEMBLED FIGURE

Cold water inlet

PREPARATION

A. Install adaptor beneath

water tank

TRYING FOR THE FIRST TIME

TROUBLE SHOOTING

If your spray outlet hole is

clogged for some reason,

simply try to move spray

ourlet up and down for a

few times manually.

B. Connect white water

tube into adaptor

nipple

C. Install main body

Seat(seat hook)coupling hole

Water pressure

control knob

Function select

control knob

Wash

Sliding nozzle

Main body

Congratulations! You are ready to use for the

first time. Be sure to turn water pressure control

knob gently until reaching your desired pressure.

Water pressure control device is only to

control water pressure, not for setting up

the duration of water spray.

TUBE 0.8M

Intallation Tools May Needed

Wrench Teflon tape Screwdriver(flat)

Water

tank

Control knob

Seat

Flexible

hose

Adapter

Valve

Stool

Main body of bidet

Over tightening flexible hoses adaptor can cause damage

to the threads and result in water leakage.

Use only hand pressure first and check for any leakage.Turn only

less than quarter turn at a time making sure there is no leakage.

A. Remove the existing toilet seat.

C.Flush toilet to drain tank completely.

B.Turn off the water valve.

D.Take out exiting water pipe.

HELPFUL TIP:

Assembly Instruction

Easy Installation

D . I . Y

1/2＂ 3/8＂ 9/16＂

ADAPTER

/ /

Parts