Owner manual

Axle Pro Equipment Instruction Guide
For your protection, use Standard Shop Safety Procedures during this process
Page 17 of 24 01 577 0092 SEPT 2011
Step 9: Sleeve Installation
a. Begin sleeve installation by placing lead into top of axle
bore visually aligning lock pin cutouts. (Photo 9A)
b. Using a STEMCO Kaiser bushing driver and brass hammer
drive axle sleeve into position until flush. (Photo 9B)
c. The axle eye is enhanced; proceed with the installation of
your STEMCO Kaiser king pin kit.
If you have any questions, please contact
STEMCO Kaiser Tech Line: 888-854-6474 Ext# 7.
Photo 9A
Photo 9C
Photo 9B