Owner's Manual

ManualsBrandsStem ManualsCommercial audio & videoWall

1

2

3

4

5

6

7

8

9

Table Of Contents

Mounting

1.

Identify

where

the

studs are on

your

mounting

surface.

2. Using

the

provided

magnet

level,

mark

the

screw

keyholes on

your

surface.

If

the

marked

points

don't

align

with

studs, use

the

provided anchors.

3. Using

the

provided screws, drill

the

first

screw

through

the

middle

keyhole

of

the

bracket &

onto

your

surface.

Knob

Screw Keyhole

4.

While

keeping

the

bracket level, drill

the

remaining

two

screws

through

the

bracket's keyholes & remove

the

magnetic

level.

Knob Keyhole Guide Marks

Knob Keyhole

5.

To

mount

the

device

to

the

bracket, align

the

guide

marks on

the

back

of

the

device

with

the

knobs on

the

bracket. Then

lightly

push

the

device in and

down

to

lock in place.