Owner's Manual

Standalone Setup (option 1)
1. Place or mount the device in a desired location in the room.
2. Using an Ethernet cable, connect the device to a network
that supports PoE +. This connection provides the device
with power, data, and other
lo T and SIP capabilities.
Note: If your network doesn't support PoE+, you should
purchase a separate PoE+
injector or PoE+ enabled switch.
3. If you need video conferencing capabilities, use the USB
type B cable provided and connect the device to your PC.
4. Lastly, we recommend you complete setting up your room
via
the Stem ecosystem platform . For more information on
setting up your room, you can visit
stemaudio.com/manuals or stemaudio.com/videos
Note:
The ecosystem platform is available on the Stem
Control
or in iOS, Windows, and Android apps. You can
also access
the platform through your web browser by
typing in the product's IP address. If you need help finding
your IP address press and hold down the Vol+ and Vol- for
5 seconds and the IP address will be read out.
5. That's it! Your Wall is all set up to work as a
standalone device.