a User Manual stem audio model: wall 1
Overview Optimized to sit on any flat surface or to be mounted on any wall, the Stem Wall is a high-quality conferencing bar array that turns any environment into a professional conference room. Equipped with 15 microphones that perform real beamforming plus full-range speakers and subwoofers, Wall ensures everybody has a voice.
Setting Up All Stem endpoints can be used as solo standalone devices or in unison with other devices within the Stem ecosystem. If you plan on using this device as an individual unit, then follow the standalone setup instructions. If you plan on using multiple Stem devices in your room, then skip ahead to the multiple device setup instructions. Speaker Volume Up Microphone Mute c=====;.
Standalone Setup (option 1) 1. Place or mount the device in a desired location in the room. 2. Using an Ethernet cable, connect the device to a network that supports PoE+. This connection provides the device with power, data, and other lo T and SIP capabilities. Note: If your network doesn't support PoE+, you should purchase a separate PoE+ injector or PoE+ enabled switch. 3. If you need video conferencing capabilities, use the USB type B cable provided and connect the device to your PC. 4.
Multi-Device Setup (option 2) 1. Place or mount the device in a desired location in the room. 2. Using an Ethernet cable, connect the device to a network that supports PoE+. This connection provides the device with power, data, and other lo T and SIP capabilities. Note: If your network doesn't support PoE+, you should purchase a separate PoE+ injector or PoE+ enabled switch. 3. 4. When setting up multiple Stem devices in a room, make sure you have a Hub.
Mounting 1. Identify where the studs are on your mounting surface. 2. Using the provided magnet level, mark the screw keyholes on your surface. If the marked points don't align with studs, use the provided anchors. 3. Using the provided screws, drill the first screw through the middle keyhole of the bracket & onto your surface. Knob Screw Keyhole 4. While keeping the bracket level, drill the remaining two screws through the bracket's keyholes & remove the magnetic level. Knob Keyhole 5.
Using Wall The Directional Array During a call, Wall uses proprietary beamforming technology to locate a legitimate voice source and to steer an array towards it. This allows Wall to focus on the speaker in the room and cancel out all other noise. The beamforming process is dynamic as it adjusts the direction of the array when the source of sound changes or moves.
Light Guide Light Activity Device Function Slow red pulsing Device is muted - Rapid red pulsing (approx.
Product Specs Connectors • USB: USB Type 8 • Ethernet: RJ45 connector (requires PoE+) Specs • • • • • • • • • • • • • • • • Frequency response: 50Hz - 16KHz Broadcast level (peak): 90d8 SPL@ lKhz from lm (5 watts RMS) Noise cancellation: > 15d8 (without pumping noise) 100% full duplex - no attenuation (in either direction) during full duplex High-end performance conforms to ITU-T G.
Warranty The following warranty statement is effective for all Stem Audio products as of May 1st, 2019. Stem Audio warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer agrees, at its option, to repair or replace with a like-new replacement any defective part(s) free of charge (except transportation charges) for a period of two years for all products.
The Ecosystem Ceiling Wall Hub Table Control
Need Some Help? Website: stemaudio.com Email: customerservice@stemaudio.com Telephone: (949) 877-STEM (7836) Product Quickstart Guides: stemaudio.com/manuals Product Setup Videos: stemaudio.
Stem Room Setup Guide Stem Room Set Up online user guide. Version: 1.
Shure Incorporated Table of Contents Setting Up Your First Room Stem Room Setup Guide 3 3 Need Some Help? 5 2/5
Shure Incorporated Stem Room Setup Guide Setting Up Your First Room Stem Ecosystem Devices are designed as a complete solution by pairing hardware with the Stem Ecosystem Platform. To cre ate your ideal setup, mix and match devices and set up your room to best meet your needs. ① Locate Ethernet and existing enterprise network hardware • Locate the established enterprise network or routing device. • Identify available PoE+ port(s) or PoE+ switch.
Shure Incorporated ⑥ Add all devices to your Organization • You can add the rest of your devices to your Organization from the same HTML interface you used to create it. • To add devices to the Organization: ◦ Go to Ecosystem > Devices. ◦ Select a device with red text (red text indicates a device does not belong to an Organization) and type in the Organiza tion password. Do this for each device outside of the Organization. ◦ Get more information about how devices are displayed in the Devices list.
Shure Incorporated • When using more than one Stem device in your room, you must use a Stem Hub or Stem Hub Express. The USB connec tion will be between the Hub and computer. • Using your preferred conferencing software, start a test call. The Stem Customer Happiness team is available to help car ry out your test call, and to answer any other questions you may have. Need Some Help? Website: shure.com/stem Email: customerhappiness@shure.com Telephone: (949) 877-STEM (7836) Setup Videos: youtube.
STEM WALL WALL MOUNT ARRAY SPEAKERPHONE OVERVIEW Stem Wall Mount Array Speakerphone is a high-quality microphone array with built-in speakers and subwoofers. Designed to be mounted on a wall or sit on a flat surface, it optimizes voice pick-up while providing full-range audio to make any environment sound like a professional conference room. FEATURES • 15 built-in microphones create 180 degrees of coverage towards the voice source. • Two full-range speakers and subwoofers.
