Installation Instructions

Testing the Unit
After waiting about 30 seconds after the PN display has powered up …press the UP Arrow until
you see a line that says
Ok BatRF TPM0 S0
This line is placed on the PN terminal by the BatRF TIM. Every 2.5 seconds the TIM alternates
the first character in the line between a space and an “*” or a space and an “!” if there is an error
or a low/flat tire.
To test the AirBat TIM device after installation turn the power on ……………………………..
Data Entry Into WebBat
Record the Vehicle #, Vehicle Type, Sensor Serial # and Wheel Position (optional) and enter the
information into WebBat.
Trouble Shooting
If the TIM is unable to communicate with the PeopleNet OBC it will be indicated with a blink code
on the LEDs of the TIM.
Part# 09-930-8210