User Manual

Speaker
Volume Up
Speaker
Volume Down
15 Beamforming
Microphones
Guide Marks
1.
Using an Ethernet cable, connect the device to a network
that supports PoE+.
Note: If your network doesn’t support PoE+, you should
purchase a separate PoE+ injector or PoE+ enabled switch.
This connection provides the device
Place or mount the device in a desired location in the room.
with power, data, and other IoT and SIP capabilities.
If you need video conferencing capabilities, use the USB
type B cable provided and connect the device to your PC.
Lastly, we recommend you complete setting up your room
via the Stem ecosystem platform.For more information on
setting up your room, you can visit
stemaudio.com/manuals or stemaudio.com/videos
Note: The ecosystem platform is available on the Stem
Control or in iOS, Windows, and Android apps. You can
also access the platform through your web browser by
typing in the product’s IP address. If you need help finding
your IP address press and hold down the Vol+ and Vol- for
5 seconds and the IP address will be read out.
That’s it! Your Wall is all set up to work as a
standalone device.
2.
3.
4.
5.
Using an Ethernet cable, connect the device to a network
that supports PoE+.
Note: If your network doesn’t support PoE+, you should
purchase a separate PoE+ injector or PoE+ enabled switch.
This connection provides the device
Place or mount the device in a desired location in the room.
with power, data, and other IoT and SIP capabilities.
You must complete setting up your room via the Stem
ecosystem platform.For more information on setting up your
room, you can visit stemaudio.com/manuals or
stemaudio.com/videos
Note: The ecosystem platform is available on the Stem
Control or in iOS, Windows, and Android apps. You can also
access the platform through your web browser by typing in
the product’s IP address. If you need help finding your IP
address press and hold down the Vol+ and Vol- for 5
seconds and the IP address will be read out.
That’s it! Your Wall is all set up to work within the
Stem ecosystem.
1.
2.
3.
4.
5.
All Stem endpoints can be used as solo standalone devices or
in unison with other devices within the Stem ecosystem. If
you plan on using this device as an individual unit, then follow
the standalone setup instructions. If you plan on using
multiple Stem devices in your room, then skip ahead to the
multiple device setup instructions.
Optimized to sit on any flat surface or to be mounted on any
wall, the Stem Wall is a high-quality conferencing bar array
that turns any environment into a professional conference
room. Equipped with 15 microphones that perform real
beamforming plus full-range speakers and subwoofers,
Wall ensures everybody has a voice.
Full Range
Speaker
Full Range
Speaker
User Manual
Wall
Overview
Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up
Subwoofer
in Back
Subwoofer
EthernetUSB
Microphone
Mute
Mounting
Using the provided screws, drill the first screw through
the middle keyhole of the bracket & onto your surface.
Identify where the studs are on your mounting surface.
While keeping the bracket level, drill the remaining two
screws through the bracket’s keyholes & remove the
magnetic level.
1.
2.
3.
4.
Knob Keyhole Knob Keyhole
model: wall1
Kensington
Lock
Using the provided magnet level, mark the screw
keyholes on your surface. If the marked points don't
align with studs, use the provided anchors.
When setting up multiple Stem devices in a room, make
sure you have a Hub. All communications between the
device and the far-end will be done through the Hub, so
no USB connection is needed.
To mount the device to the bracket, align the guide
marks on the back of the device with the knobs on the
bracket. Then lightly push the device in and down to
lock in place.
5.
Screw Keyhole
Knob