Owner's Manual

4
ON OFF
WARNING: This product must be installed by a certied electrician according to the electrical and building codes
eective in your region.
Install your fan heater in an unobstructed location at least 6 in.
(15 cm) o the ground.
TIP: You can access the fan heater’s controls more easily
if you install it 10 in. (25 cm) o the ground.
Make sure that objects or furniture near the heater can
withstand the heat it gives o.
Do not install the heater on a wall behind a door.
If a piece of furniture is nearby, make sure the fan heater will
not impede the opening of its drawers or doors.
WARNING: To avoid any risk of overheating, leave a
clearance of at least 12 in. (30 cm) in front of the fan
heater and 6 in. (15 cm) on either side of it.
No objects or furniture such as, but not limited to,
blankets, towels, a bed, a laundry basket, clothing,
papers, etc., should come into contact with fan
heater. Keep these items at least 12 in. (30 cm)
away fromit.
It is not designed to be used or stored in wet areas
or areas containing flammable liquids, combustible
materials or corrosive, abrasive, chemical, explosive
and flammable substances such as, but not limited
to, paint, gasoline, chlorine, sawdust and cleaning
products.
1
WHERE TO INSTALL YOUR OASIS FAN HEATER
THE UNIT MUST NOT BE INSTALLED UPSIDE DOWN OR SIDEWAYS.
To protect yourself from the risk of electric shock, turn o the
power to the lead wires from the electrical panel.
2
CUTTING THE POWER SUPPLY
6 in.
(15 cm)
min.
6 in.
(15 cm)
min.
12 in.
(30 cm)
min.
NOTE: If you purchased the SOA1501PW model, refer
to the "Install the SOA1501PW model (with a power
cord)" section on page 9.