Owner's Manual

10
NAVIGATING THE ADVANCED MENUS
The advanced menus make it possible to use the advanced options and congure the thermostat’s settings.
Access advanced menus
>>>
Hold 3 sec.
+ simultaneously
Navigate the menus to select the desired option
>>>
or
Conrm the selection
>>>
+ simultaneously
Quit advanced menus
>>>
Hold 3 sec.
+ simultaneously
Note: The selection is automatically conrmed after 30 seconds of inactivity, except for selections made in menus 5.6 Resetting
the thermostat's default settings.
ADVANCED MENUS OF BUILT-IN THERMOSTAT
Menu 1
Temperature display unit settings (°C or °F )
Menu 2
Locking/Unlocking keypad settings
Menu 3
Open window detection settings
Menu 4
Setting the BOOST mode setpoint temperature
ADVANCED MENUS OF BUILT-IN THERMOSTAT
Menu 5
°STELPRO information
5.1 : Fan heater version
5.2 : Date manufactured
5.3 : Month manufactured
5.4 : Year manufactured
5.5 : Internal control code
5.6 : Reset the thermostat to its default settings
USING BOOST MODE
BOOST mode allows you to increase room temperature
quickly for a given period of time. When you use BOOST
mode, the fan heater operates at a higher speed and power to
increase room temperature quickly. When the desired tem-
perature is reached, the power decreases, but the fan heater
maintains the BOOST mode setpoint temperature.
By default, BOOST mode is set to 30 °C (86 °F). To learn
how to change it, see Dening the setpoint temperature for
BOOST mode.
To activate BOOST mode:
1. Press the button. The minimum BOOST mode run time
(10 min.) will appear on the screen.
2. Press the button again to increase BOOST mode run
time (20, 30 or 60 minutes).
The fan heater will operate in BOOST mode for the run time.
NOTE: If you press or while the fan heater is in BOOST
mode, the BOOST mode setpoint temperature will ash for
three seconds, but you cannot change it.
To turn o BOOST mode before the end of the selected time,
press the button.
Locking or unlocking the built-in thermostat’s keypad
You can lock the thermostat keypad to prevent the
temperature setpoint from being changed directly on the
thermostat. By default, the thermostat keypad is unlocked.
When the keypad is locked, the icon displays on the
thermostat’s home screen.
1. Access menu 2 .
2. Select ON to lock or OFF to unlock the keypad.
3. Conrm the selection.